top of page
PM08-CAN Power Module 14S, 200A

Feature

  • Supports 2-14S & 200A Cont, 400A Burst
  • DroneCAN Communication Protocol
  • Small & Compact Design 
  • Two 5V Output with Independent BEC IC and Circuitry
  • Separated Sensor and BEC Board to Minimize Electrical Noise Interference
  • Galvanically Isolated Current Sensor IC (AEC-Q100 Grade 1 qualified)
  • High Accuracy Temperature Sensor for Temperature Monitor
  • High-Efficiency Aluminum Heat Dissipation Shell

 

Specifications 

  • Processor:STM32F405RG 168MHz 1024KB Flash  196KB RAM
  • Voltage input: 7~60.9V (2S~14S) 
  • Continuous current:200A
  • Burst current
    • 400A @ 25℃ 1 sec
    • 1000A @ 25℃ < 1 sec
  • Max current sensing: 376A
  • Voltage accuracy: ±0.1V 
  • Current accuracy: ±5%
  • Temperature accuracy:±1℃
  • Power port output: 5.3V/3A each port
  • Protocol: DroneCAN 
  • Operating temperature :-25℃~105℃
  • Firmware upgrade: Support
  • Calibration:  Support

 

Interface Type

  • Power & CAN Port: Molex CLIK-Mate 2mm 6Pin
  • Battery IN/OUT Options:
    • XT90 Connectors
    • Tinned Wires
    • XT90 & Ring Terminals

 

Status LED

  • Flashing quickly continuously: MCU is in the bootloader stage, waiting for firmware to be flash
  • Flashing quickly for 3 seconds, and then on for 1 second: Waiting for CAN connection
  • Flashing slowly (one-second intervals): CAN is successfully connected

 

Mechanical Spec

  • Size: 45mm×41mm×26mm (Not Include Cable)
  • Weight: 185g (Include Cable)

PM08-CAN Power Module 14S, 200A

  • Give us a call 813-575-2160

© 2024 by FTG LLC,  All Rights Reserved.

Fowado Unmanned Systems 333 N Falkenburg Rd, B212, Tampa, FL, 33619
Office: 813-575-2160  Email: contactus@fowadous.com
bottom of page