Key Design Point
High-performance ADIS16470 Industrial IMU with high accelerometer dynamic range (±40 g), perfect for accurate motion sensing in demanding UAV applications
All New advanced durable vibration isolation material with resonance frequency in the higher spectrum, ideal for industrial and commercial drone applications
Triple redundant IMU & double redundant barometer on separate buses
High-performance STM32H753 Processor
Modular flight controller: separated IMU, FMU, and Base system
Safety-driven design incorporates sensors from different manufacturers and model lineups
Independent LDO powers every sensor with independent power control.
Ethernet interface for high-speed mission computer integration. Transformerless can be achieved using 50 Ohm termination resistors at the target device (AN2190 50 Ohm termination).
Temperature-controlled IMU board, allowing optimum working temperature of IMUs
Hardware switchable 3.3V or 5V signal mode (requires base board modification)
 
All new Vibration Isolation Design
This new vibration isolation design uses a custom-formulated durable silicone-based isolation material in place of the traditional foam design. Backed by extensive R&D and testing, it offers optimal IMU damping characteristics with resonance frequency in the higher spectrum, perfect for industrial and commercial drone
 
Note: 
FC Module + a baseboard is required for this product to function.  A FC Module or a Baseboard by itself will not function.
 
Specification
Processors & Sensors
FMU Processor: STM32H753
32 Bit Arm® Cortex®-M7, 480MHz, 2MB flash memory, 1MB RAM
IO Processor: STM32F103
32 Bit Arm® Cortex®-M3, 72MHz, 64KB SRAM
On-board sensors
Accel/Gyro: ADIS16470
±40g, Vibration Isolated, Industrial IMU
Accel/Gyro: IIM-42652
±16g, Vibration Isolated, Industrial IMU
Accel/Gyro: ICM-45686 with BalancedGyro™ Technology
±32g, Hard Mounted
Barometer: ICP20100
Barometer: BMP388
Mag: BMM150
NXP EdgeLock SE050 Plug & Trust hardware secure element 
Electrical data
Voltage Ratings:
Max input voltage: 6V
USB Power Input: 4.75~5.25V
Servo Rail Input: 0~36V
Current Ratings:
Telem1 output current limiter: 1.5A
All other port combined output current limiter: 1.5A
Operating Temperature: -25-85°C
Mechanical data
Dimensions
Flight Controller Module: 38.8 x 31.8 x 30.1mm
Standard Baseboard: 52.4 x 102 x 16.7mm  (Aluminum)
Mini Baseboard: 43.4 x 72.8 x 14.2 mm
Weight
Flight Controller Module: 50g
Standard Baseboard: 72.5g  (Aluminum)
Mini Baseboard: 26.5g
 
SKU 11070 includes:
Pixhawk 6X Pro Flight Controller Module
Optional IMU Damping Replacement (softer than pre-installed)
 
SKU 20262/20316/20261 includes: 
Pixhawk 6X Pro Flight Controller Module
Pixhawk Standard Baseboard v2A/ Pixhawk Standard Baseboard v2B/ Mini Baseboard
PM02D HV Power Module
Cable Set
 
Warning: Pixhawk 6X flight controllers do not support analog power modules.