top of page
M8N GPS

The M8N GPS has an UBLOX M8N module, IST8310 compass, tricolored LED indicator, and a safety switch. There are 3 different connectors options for different purposes. This module ships with a baud rate of 38400 5H

 

Features and Specifications:

  • Ublox Neo-M8N module
  • Industry leading –167 dBm navigation sensitivity
  • Cold starts: 26s
  • LNA MAX2659ELT+
  • 25 x 25 x 4 mm ceramic patch antenna
  • Rechargeable Farah capacitance
  • Low noise 3.3V regulator
  • Current consumption: less than 150mA @ 5V
  • Fix indicator LEDs
  • Protective case
  • Cable Length: 26cm
  • Diameter 50mm total size, 32 grams with case.

 

PX4 Autopilot users: The GPS RGB LED Driver Chip has been updated. Ensure the PX4 firmware is Stable Release v1.12.2 or newer for proper LED driver Support.

 

Ardupilot User: If unable to preform normal compass calibration "compass dance" for any reason, set parameter COMPASS_ORIENT=6 (Yaw270) for proper compass orientation.

 

PIN MAP

SKU12012  Holybro M8N GPS (JST GHR1.25mm 10pin cable):
This JST GH 10Pin connector can be used on Pixhawk Standard Flight Controller 10pin“GPS Module”or "GPS1" input port.

 

SKU12014  Holybro M8N 2nd GPS(JST GHR1.25mm 6pin cable):
This JST GH 6Pin connector can be used on Pixhawk Standard Flight Controller 6pin“UART & I2C”or "GPS2" input port as secondary GPS. This GPS is also compatible with the Cube Flight Controller GPS2 Port.

 

 

M8N GPS

SKU: 12012
  • Give us a call 813-575-2160

  • 1x M10 GPS Module

    1x Fixed Carbon Fiber GPS mount

© 2024 by FTG LLC,  All Rights Reserved.

Fowado Unmanned Systems 333 N Falkenburg Rd, B212, Tampa, FL, 33619
Office: 813-575-2160  Email: contactus@fowadous.com
bottom of page